Site Information

 Loading... Please wait...

ProBuilder Kit Street Deck

Once you have the hang of vacuum laminating a board, advance to this ProBuilder Kit and totally customize or prototype skateboards.

  • Once you have the hang of vacuum laminating a board, advance to this ProBuilder Kit and totally customize or prototype skateboards.

Product Description:

These kits are designed for the board builder who is experienced in the Roarockit vacuum method. Design and shape your own foam mold, press uncut sheets of veneer, then trim and finish your custom design. Instructions do not come with these kits. Choose the kit that best suits your needs.

ProBuilder Kit Street Deck

Calculated at checkout
Total Price:
  Calculated at checkout
Share to facebook Share to Twitter Share to pin Share to Google Plusone Share to Twitter

ProBuilder Kit Street Deck 

  • Two 9-layer sets of maple 9.5 x 34 x 1/16” veneer
  • Each set contains 2 Face, 2 Crossband and 5 Core sheets
  • Select the thickness for your Cross band thickness, 1/16" or the thinner 1/24"
  • One slab of 9.5 x 34 x 3” foam for mold shaping

Thin Air Press Kit

    • 20 x 70” heavy duty vinyl vacuum bag with one-way valve attached
    • manual vacuum Super Pump
    • breather netting
    • extra sealing tape

Recommended glue amount for this kit: 23 oz


These kits are designed for builders with experience using the Roarockit vacuum-laminating method. Instructions do not come with these kits. For in-depth tutorials view the photo and video tutorials.

Click here to see many related tutorials
Shaping a Foam Mold
Building a 1” Drop Deck
Watch How to Build a Custom Skateboard Part 1 »

The foam mold, Thin Air Press Bag and pump, edging tool and breather netting are designed to be used for many, many builds.

Keep all your reusable kit parts in good working order by following the maintenance tips included with the kit.

Using uncut sheets of veneer, plywood backer boards and external clamps can puncture a Thin Air Press bag. Treat your TAP bag with care, inspect regularly for holes.

Q: How do I shape the mold foam?
A: View our tutorial first, then assemble the tools to mark, cut and sand the mold foam

Q: What else do I need to make a board with this kit?
A: Glue and a roller, possibly an off-cut sheet of plywood to act as a stiffener under the mold, and a jigsaw (or bandsaw) to trim out the pressed board

Q: How radical a shape will the maple veneers bend around?
A: If you can bend it with your hands, it will bend in the Thin Air Press. Best way to check is to do a DRY RUN, stack your veneer on the mold and press it in the TAP bag.

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Related Products

Our patented “Thin Air Press” system is a safe and easy-to-use manual vacuum press system for wood bending projects.

Thin Air Press