Site Information

 Loading... Please wait...

Street Deck Faded Surface-Dyed Color Sheet

These veneers are faded to reveal the natural grain when sanded. Not suitable for edge and end grain use.

  • These veneers are faded to reveal the natural grain when sanded. Not suitable for edge and end grain use.
  • Image 2

Product Description:

The color is not fully infused into this veneer so that when you sand it, the natural grain will show through. Adding a coat of finish will intensify the sanded color.

These veneers are not suitable for edge and end grain use.

Please know that as the grain density in the veneer accepts the dye differently, there can be dramatic variance in the color when sanded.

We cannot ship small numbers of these sheets as they will easily bend and crack in shipping. The minimum number we can ship on their own is 7 sheets. For less than 7 you must order them along with another veneer pack.

NOTE: THESE SHEETS ARE NOT SOLD SEPARATELY - If you place an order for less than 7 sheets, we will refund the order back to you.

Street Deck Faded Surface-Dyed Color Sheet

Calculated at checkout
Total Price:
  Calculated at checkout
Share to facebook Share to Twitter Share to pin Share to Google Plusone Share to Twitter

Street Deck Faded Surface-Dyed Color maple veneer

  • 9.5" x 34-36" x 1/16” sheet size, all long grain
  • accepts glues such as Titebond III and epoxy
  • color shades change from sheet to sheet, as well as how far in the dye has penetrated.

Surface-dyed color sheets can be used for top and bottom sheets of a skateboard or other laminated project.

Glue up as you would your other veneer sheets.

A color sheet on the graphics side of a board makes a great base for your design.

Any loose dye may rub off on your hands and clothing, some colors more than others, so protect your self, clothes and your work surface when using these sheets.

Veneer expands and contracts with moisture. Our veneer is shipped with 7-9% humidity. Keep your veneer stored away from heat sources, and lay it flat.

If your work area is very dry, keep your unused veneer sealed in plastic (a garbage bag will do) until you are ready to use it.

Until it is laminated together, veneer sheets are prone to splits, especially the cross grain sheets. Handle them with care, but if any sheets do split, they can be repaired with a bead of glue and masking tape.

Q: Can I paint my design over the color?
A: Yes, it is not as waxy as some hand-stains are, so it takes acrylic and spray paints just fine.

Q: What types of glue work with this color veneer?
A: Same glue you would use for your other woodworking projects, PVA glues such as Titebond III, epoxy.

Q: Are the dyes used to create this veneer food safe?
A: The manufacturers who supply us with this veneer confirm that the dyes used are non-toxic but they are not guaranteed to be food-safe. This veneer is sold for recreational parts, such as skateboards.

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Related Products

Our patented “Thin Air Press” system is a safe and easy-to-use manual vacuum press system for wood bending projects.

Thin Air Press