No more wasted glue rollers! The closed cell foam roller doesn't absorb glue so you are not wasting it.
And, instead of having to measure each time you apply a layer of glue, simply roll it on.
It lays down a smooth coat of glue that is so critical when laminating sheets of veneer.
The easiest method for glueing multiple boards at once!.
• one 6” wide glue applicator with glue holder and stand
• one extra foam roller
Fill the glue holder with your favorite woodworking glue such as Titebond III, Plybond III or any other PVA glue.
Test how much glue is coming out and adjust using the handle.
Roll glue out, ensuring you have put an even coat over the entire surface leaving no dry spots
Rest applicator on stand.
Wash roller and clean the container as soon as possible, do not leave glue to dry.
Do not allow glue to dry on the roller or in the glue holder. Wash all items between uses.
Q: How much glue should I put on my veneer sheets?
A: Please see our video tutorial
Q: What kind of glue can I use in the applicator?
A: PVA, water-based glue only. Do not use epoxy or polyurethane glue.
Q: Will the roller soak up all my glue?
A: No, it is a closed cell foam roller but will need immediate cleaning after use