Loading... Please wait...
Canada
- Home
- Fingerboard Building
- Fingerboard Multiboard Street Deck Kit
Fingerboard Multiboard Street Deck Kit
Product Description:
The Fingerboard Multiboard Street Deck Kit gives you options by providing pre-designed shapes on 3 of the veneer sheets. You decide what build to make, and the rest is easy. Kit includes 2 sets of veneer.
These kits include the raw materials plus the new, innovative Launchpad vacuum technology to custom-make Fingerboards. You control the laminating process, finish the edges to your specs then design and apply your own branding and graphics.
Please note the Fingerboard Multiboard Kit requires a cutting tool (not included) to cut out the shape of the board.
Select from 3 different shapes using pre-engraved templates on each veneer!
Cruiser: Length - 3 3/4” / Width - 1 1/4”
Street Deck: Length - 4 1/8” / Width - 1 3/8”
Old School: Length - 4 1/8” / Width - 1 1/2”
Fingerboard Multiboard Street Deck Kit
Calculated at checkout
Fingerboard Multiboard Street Deck Kit contains:
- 5-layers of Canadian maple per board (2 boards)
- includes 3 pre-engraved template sheets (3 possible shapes) and 2 cross grain sheets per board
- 3-dimensionally shaped mold
- Launchpad
- glue and glue spreader
- sandpaper
- grip tape
- illustrated instructions
and a Thin Air Press Kit
- 10.5 x 20” heavy duty vinyl vacuum bag with one-way valve attached
- manual vacuum Super Pump
- extra sealing tape
By following the printed instructions included in the kit box, you will be guided through the glue up, stacking on the mold and Launchpad, inserting and sealing into the TAP bag. Using the manual vacuum pump to evacuate the air, the Thin Air Press will press the veneers over the mold. The sanding process is described, as well as some graphics suggestions.
The mold, Launchpad, Thin Air Press Bag, and pump are designed to be used for many, many builds.
Keep all your reusable kit parts in good working order by following the maintenance tips included with the kit.
Q: Is this kit reusable?
A: Yes. Every thing but the veneer and glue are reusable
Q: What if my TAP bag or valve is leaking?
A: 99.9% of the time, the seal is not closed up properly. Dust and debris can prevent the top cap of the valve to seal, rinse cap with water. For more in-depth details, see the TAP kit FAQ’s page.
Q: Can I make Fingerboards without the Launchpad?
A: No, the Launchpad is required to create the additional vacuum pressure needed to press such a small deck.
Q: Why don't I need to use breather netting with this kit?
A: The Launchpad is designed to allow you to use the bag without breather netting. Position the valve within the red circle on the Launchpad.
Q: Can I get more veneer?
A: A Refill for this kit is available here
Q: Will stuff last if I don’t use it right away?
A: Veneer will absorb and lose moisture, so keep it sealed in plastic (or the carton it arrived in) but away from any heat sources. Lay it flat to prevent warping. Prevent the glue from freezing.
Q: How do I get this cheaper?
A: Become an entrepreneur! Each kit allows you to make more than one deck, build one for yourself and generate income from the other boards you build!
Q: What else do I need to complete this project?
A: A moisture protector is recommended (sponge on water-based outdoor clear coat) to seal all surfaces, especially your edges and before applying any graphics.
Related Products
-
Fingerboard Street Deck Kit $179.95 -
Fingerboard Pro Kit $229.95 -
